Sanding Paper Disc

PAOLA ABRASIVE GROUP

PAOLA Sanding Paper Disc

Black Sanding Paper Disc

Sanding Paper Disc

Sanding Paper Disc

PAOLA Sanding Paper Disc is a product that is widely used in the market of various industries and has been favored in the market for some time due to the increase in the speed of work. This product is a good alternative to working by hand. Of course, its old type is known as Stick Back Sanding Disc, which had its own problems and was almost removed from the market with the arrival of Sanding Paper Disc.

Because this product is easily separated from its special pad and you can easily install the next Sanding Paper Disc and enjoy the convenience of work. Also, in this method, the speed of changing sandpaper increases greatly. And the operator does not have to use liquid glue to stick the sandpaper to the pad as in the past. Rather, it replaces the pad within a few seconds.

Sanding Paper Disc is connected to the milling machine by a plastic pad, in fact, that plastic pad is a type of interface that has a bead on the back and a rough surface in front of it that the fluff easily adheres to its surface, and the bead is the screw. The milling machine is connected. And there is no need to separate the pad from the milling machine every time. It is enough to remove the Sanding Paper Disc and install the next one.

PAOLA Sanding Paper Disc

Types of Sanding Paper Disc in terms of type: There are different types of sanding paper discs, which are classified according to the number of holes. The holes on this product are due to the device’s suction operation, which removes dust from the surface due to wear and transfers it into a special bag in the suction device. This will create a better surface smoothness on the surface of the part.

1- Sanding Paper Disc without holes: The most common and most used type of sanding paper is the type without holes, which are usually installed on normal pads and installed on non-suction devices. These devices usually support 115mm and 180mm diameters.

Black Sanding Paper Disc
Black Sanding Paper Disc

2- Sanding Paper Disc 6 holes: This product is installed on pads with 6 holes, which causes dust to enter a special bag through these 6 holes and the surface of the piece is always clean. Cleanliness of the surface makes for a better surface smoothness on the part.

Sanding Paper Disc 6 holes
Sanding Paper Disc 6 holes

3- Sanding Paper Disc 7 holes: Perforated products are usually installed on inflatable devices, the 7-hole type usually includes one hole in the center and 6 holes around it, which causes the dust produced as a result of wear to enter the bag for the suction device. to be transferred Usually, the dimensions of the central hole are larger than the surrounding holes.

Sanding Paper Disc 7 holes
Sanding Paper Disc 7 holes

4- Sanding Paper Disc 8 holes: There are 8 holes on this product, but there is no hole in the center, and in some cases it has 7 holes around and one hole in the center. And it is usually connected to wind machines with dust suction. The number of holes does not affect the quality of the product and depends only on the type of plastic pad and the type of device and has no other use.

Sanding Paper Disc 8 holes
Sanding Paper Disc 8 holes

5- Sanding Paper Disc 15 holes: As stated in previous articles, the number of holes depends on the type of device and its pad. Therefore, this product is designed with 15 holes for more suction operations, and it can easily remove the dust caused by abrasion operations from the surface of the part, which has a significant impact on the smoothness of the surface.

Sanding Paper Disc 15 holes
Sanding Paper Disc 15 holes

6- Sanding Paper Disc 75 holes: This product has 75 holes on the sandpaper, and its pad must also have 75 holes, but it can be said that this product is one of the least-used sandpaper because it is used in very special cases and is not usually used in general, and also the pads The plastic of this product is also very rare.

Sanding Paper Disc 75 holes
Sanding Paper Disc 75 holes

7- Sanding Paper Disc 104 holes: Finally, we come to the least consumed type of Sanding Paper Disc, which has 104 holes, but its consumers are very few and in some countries they are not used at all, but this is not the reason for its non-existence and it can be obtained.

Sanding Paper Disc 104 holes
Sanding Paper Disc 104 holes

Types of Sanding Paper Disc in terms of the type of body material: sandpapers can be produced in different types with the purpose of working on specific parts, and each one has its own unique performance on specific parts. Some people think that any kind of sandpaper can be used on any part, maybe this work is somewhat practical, but it is not professional. Professionals are looking for maximum productivity in their product.

Black Sanding Paper Disc
Black Sanding Paper Disc

But there are people who just want to do something temporary. Therefore, for this group of people, all sandpapers have the same function and they are all the same. If this thinking is fundamentally wrong, and each type of sandpaper is designed for a specific task, and for this reason, you should be careful in choosing the right sandpaper and its fit with the piece.

PAOLA Sanding Paper Disc
PAOLA Sanding Paper Disc

1- Sanding Paper Disc based on paper: As its name suggests, Sanding Paper Disc is produced on the basis of paper, which means that sanding grains are stuck on special paper by a special type of resin and are cured during an operation and become sandpaper that has all kinds of They have different

PAOLA Sanding Paper Disc
PAOLA Sanding Paper Disc

In fact, the most used type of this product is the type of paper that is used. And the general consumers prefer to use its high-quality paper because it is approved by the general consumers both in terms of price and ease of use.

2- Sanding Sponge Disc based on sponge: This sandpaper is made on the basis of sponge, that is, the sandpaper grains have been poured by resin on a special type of sponge and heating has been done on it.

3- Sanding Film Disc based on film: This type of sanding disc is based on the type of plastic film that is layered. It is made of plastic and sandpaper grains are mounted on it by glue. This product has a special use in automotive and power plant industries.

Types of Sanding Paper Disc in terms of the type of abrasive: Before choosing a sandpaper, we must specify the type of abrasive. The abrasive type of each sandpaper depends on the type of part, all parts do not have the same chemical composition and texture, and when choosing a sandpaper, you should pay attention to the type and material of the part.

1- Aluminum Oxide Sanding Paper Disc:

Sanding Paper Disc
Sanding Paper Disc

2- Silicon Carbide Sanding Paper Disc: This product is made of silicon carbide powder, although the purity of silicon carbide powder is very important. Sometimes people only pay attention to the black color of this type of sandpaper, but it should be known that their purity is very different and this causes a big price difference between them. This type of sandpaper is also known as black Velcro Disc Abrasive.

The main application of this product is on building stones, but it can be used on cast iron and alloy parts, and in some cases it can be used on all kinds of glass. But the best option is to use it on granite, marble and travertine stones, and you can even use water to cool its surface.

PAOLA Sanding Paper Disc
PAOLA Sanding Paper Disc

3- Zirconia Sanding Paper Disc: In this type of product, zirconia material is used. Zirconium is a powerful and valuable element that is very expensive and adding it to abrasive materials can greatly increase the resistance of the abrasive grains and increase the life of the sandpaper.

Usually, zirconium sandpapers are used on stainless steel and super alloy and artificial stones. These parts are of the highest quality and have high resistance to wear, that’s why zirconium sandpaper is a very good choice for this type of parts.

4- Ceramic fluffy back: The most expensive type of sandpaper is the ceramic type, which uses very powerful abrasive materials. Therefore, this type of sandpaper can be used on the hardest parts and achieve very favorable results. This type of abrasive is even more expensive than zirconium type. For this reason, they are used in very specific and specialized industries.

Zirconia Sanding Paper Disc
Zirconia Sanding Paper Disc

Types of Sanding Paper Disc in terms of dimensions: This product is produced in different dimensions due to the variety of uses to improve the ease of work. This product is produced and supplied in the global market with dimensions of 35mm, 77mm, 115mm, 125mm, 150mm and 180mm.

1- 35 mm Sanding Paper Disc : The diameter of this product is 35 mm, which is used in places where there is very little space for wear. There are always surfaces in industries where small tools should be used to wear that area, and this tool with a diameter of 35mm is very practical.

2- 77mm Sanding Paper Disc : The diameter of this product is 77mm, this product is very delicate like the previous type and is used for places where access is limited. Of course, it can be said that these dimensions, like the 35mm diameter, are less efficient because they are used less. However, it is suitable for wear in some inaccessible places.

3- 115mm Sanding Paper Disc : One of the most widely used 115 mm sanding paper products, which has the highest demand in all industries. This size is one of the most popular sizes available, which has many fans and is installed on mini devices. And it has suitable dimensions to cover all surfaces and makes the work easier for the operator. This is because smaller dimensions increase wear time, and on the other hand, larger dimensions impose more space restrictions on the work surface.

4- 125mm Sanding Paper Disc : 125mm size is usually installed on air machines, and in most cases, these types of sanders have a mount for dust suction. This product is used in industries that use air milling machines and need dust to be removed from the part by suction in order to have a better surface quality and pollute the environment less.

5- 150mm Sanding Paper Disc : This size of sandpaper, like 125mm, is installed on the air milling machine in most cases, and most of the time, most of the air machines are equipped with dust suction, and as a result, dust does not remain on the piece, and a better surface smoothness is created on the surface of the piece. and also the ambient air is less polluted because the dust enters a special bag by the suction device.

6- 180mm Sanding Paper Disc : After the 115 mm diameter, 180 mm is one of the most widely used sizes, which has its fans because it can wear a wide surface and the work speed increases greatly. The pads of this product are very abundant in the market and they can be easily obtained.

Types of PAOLA Sanding Paper Disc in terms of quality: In general, Paula products are produced and supplied in 2 excellent (very high quality) and economy (economic and cost-effective) qualities. PAOLA Black Sanding Paper Disc is for stone (silicon carbide) with excellent quality, and all its raw materials are made in Germany, and its aluminum oxide type, which is red in color, is produced and supplied with economy quality.

In fact, the economy type of PAOLA brand has much higher quality than other competitors. And its quality is such that it can satisfy 99% of consumers and create favorable results for consumers and make them fans of this product.

Specifications of PAOLA Sanding Paper Disc: PAOLA Silicon Carbide Sanding Paper Disc (black Sanding Paper Disc) with excellent quality in #40 – #60 – #80 – #100 – #120 – #150 – #180 – #220 – #280 – # #320 – #400 – #600 are marketed. and PAOLA Aluminum Oxide Sanding Paper Disc (red Sanding Paper Disc) with economy quality in #40 – #60 – #80 – #100 – #120 – #150 – #180 – #220 – #280 – #320 – #400 – 600# It is.

Application of PAOLA Sanding Paper Disc : In general, this product is produced and supplied in different grades and granularities, as well as in 4 types of abrasives such as aluminum oxide, silicon carbide, zirconia or zirconium, and ceramic. It is widely used in all industries and can cover all industries, industries such as wood and automotive industries, power plants, refineries, metal, and in most industries are using this product.

Advantages of PAOLA Sanding Paper Disc: What can be expected from a quality product? Safety, security, warranty, quality, long life, reasonable price that Paula brand covers all these things completely. Of course, by using a quality product, you will save your life or the life of your operator and you will prevent any physical harm to him and mental harm to his family. And the health issue of employees and workers is the first priority.

Black Sanding Paper Disc
Black Sanding Paper Disc

In the end, to order the product, first read Paula’s catalog table completely and you can send us your order using the order form at the bottom of the page, please fill out the form below carefully and make sure your contact information is correct. You can also send us your comments about PAOLA products at the end of this page.

PAOLA Sanding Paper Disc Catalog

پشت کرکی پائولا
قطر
متریال
رنگ سنباده
دانه بندی
موارد مصرف
کیفیت
تعداد در جعبه
تعداد در کارتن
115mm
اکسید آلومینیوم
قرمز
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600#
چوب ، فلزات عمومی
اکونومی
eco
100 عدد
2000 عدد
115mm
سیلیکون کارباید
مشکی
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600#
سنگ ، شیشه ، چدن
اکسلنت
Excellent
100 عدد
2000 عدد
115mm
زیرکونیوم
آبی یا سبز
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600# 800# 1000# 1200# 1500# 2000#
استنلس استیل ، سوپر آلیاژ ، کورین
اکسلنت
Excellent
100 عدد
2000 عدد
180mm
اکسید آلومینیوم
قرمز
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600#
چوب ، فلزات عمومی
اکونومی
eco
100 عدد
800 عدد
180mm
سیلیکون کارباید
آبی
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600#
سنگ ، شیشه ، چدن
اکسلنت
Excellent
100 عدد
800 عدد
180mm
زیرکونیوم
آبی یا سبز
40# 60# 80# 100# 120# 150# 180# 220# 280# 320# 400# 600# 800# 1000# 1200# 1500# 2000#
استنلس استیل ، سوپرآلیاژ ، کورین
اکسلنت
Excellent
100 عدد
800 عدد

Economy (eco): The quality of economy products is at the standard level and for general use, and this quality is very economical in terms of price.

Excellent: The quality of Excellent products is at the level of the highest global standards and with a very long life, with the best filing and smoothness of the surface and speed of work.

FAQ

Of course, there is a huge difference between these two products, and this difference leads to the type of part you use. What kind of piece do you want to use this product on, iron, cast iron, steel, steel, bronze, wood, etc., its correct selection depends on these factors.

According to the above explanations and with the help of the catalog table, you can easily recognize this difference and choose the right product. Note that the wrong choice of product type and even granulation can result in unfavorable consequences for you in the production process.

The reason is quite clear, synthetic stones are very hard and generate a lot of heat during wear, which leads to damage to the sanding grains. But with the use of zirconium type, the resistance of sanding is much higher and the springs of sanding are not filled and the amount of heat is controlled. For this reason, it is a suitable option for artificial stone.

Of course, its price is very different and higher than other types such as silicon carbide, but it is worth to get a product that has a long life compared to other types. and prevent damage to the sandpaper and even damage to the piece. Sometimes, not using a high-quality product can severely damage our precious piece and force us to bear heavy costs.

In this product, very thick paper made in Germany is used, that’s why this product has a long life and also has a great cutting power.

Also, the paper of this product is completely waterproof and the operator can easily moisten the surface of the piece with water while working without damaging the sandpaper.

The best way to send a request for representation is to contact us through the form at the bottom of the page. Be sure to enter your full details with the correct contact number in the contact form. Our sales experts will contact you as soon as possible.

Yes, this product is made of very high quality and pure silicon carbide grains, which, in addition to having a very good performance on all kinds of stones, can also be used on alloy surfaces such as cast iron and even glass safely. In fact, this product is for building stone, cast iron and glass.

Black Sanding Paper Disc
5/5 - (252 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *